Differences

This shows you the differences between two versions of the page.

--- en:how_to_create_an_interface [2023/06/14 15:32] – fw
+++ en:how_to_create_an_interface [2025/04/01 10:51] (current) – [How do I create an interface?] bk
@@ Line 1: / Line 1: @@
 ======  How do I create an interface? ======
-For a newsletter, new addresses are generally obtained automatically, e.g. via the company website. When using REST you will find the interfaces under //Addresses > Interfaces//.
+For a newsletter, new addresses are generally obtained automatically, e.g., via the company website. When using REST, you will find the interfaces under //Addresses > Interfaces//.
-<WRAP round tip 80%>
-If you use SOAP, you will find all address interfaces under //Addresses > Generation//.  To do this, read the step-by-step instructions in the article "//[[en:how_to_create_a_new_adress_generation]]//".
-</WRAP>
 ==== Creation of an interface ====
-Via //Addresses > Interfaces// you can create a new interface with this button:
+Via //Addresses > Interfaces//, you can create a new interface with this button:
 {{:en:addresses_interfaces_button.png?nolink&150|}}
-The following window opens via //Create interface//, in which you assign a name, select the channel (E-mail, App Push, SMS, Print, Web Push, Voice), the opt-in type (Double opt-in, Single opt-in) and configure hooks. You can also enter a URL for redirects.
+The following window opens via //Create interface//, in which you assign a name, select the channel (E-mail, App Push, SMS, Print, Web Push, Voice), the opt-in type (Double opt-in, Single opt-in), and configure hooks. You can also enter a URL for redirects.
 {{:en:addresses_interfaces.png?nolink&600|}} \\ Now the interface has been created and provided with an ID.
-==== Menue item Sheet ====
+==== Menu item Sheet ====
 === Configure hooks ===
-Under //Add hook// you can define which //Action// should be carried out with the generated address. First choose between the following actions: \\
+Under //Add hook//, you can define which //Action// should be carried out with the generated address. First, choose between the following actions: \\
 \\
 {{:en:addresses_interfaces_hook.png?nolink&250|}}
@@ Line 32: / Line 29: @@
-After a successful or failed login, you can be redirected to any page. To do this, enter a URL, e.g. a confirmation page on your company website.
+After a successful or failed login, you can be redirected to any page. To do this, enter a URL, e.g., a confirmation page on your company website.
-You can specify a URL including a protocol for forwarding if the login was successful. Appending parameters is possible to personalize the landing page.
+You can specify a URL, including a protocol for forwarding, if the login was successful. Appending parameters is possible to personalize the landing page. You can also enter a URL, including a log for forwarding, in the event of a failed login.
-You can also enter a URL including a log for forwarding in the event of a failed login.
 === Copy interfaces ===
-At the top right of the interface you have the option of copying the created interface with all the associated settings.
+At the top right of the interface, you have the option of copying the created interface with all the associated settings.
 {{:de:addresses_interfaces_copy.png?nolink&100|}}
+==== Menu item Log ====
-==== Menue item Log ====
 Here you will find a list of user actions:
@@ Line 56: / Line 51: @@
 | Message | Comment entered via API (optional) |
+==== Menu item Statistics ====
-==== menue item Statistics ====
 Above you will find the following two statistics:
-Registrations - Number of registered logins. In the case of double optin procedures, regardless of whether the registration was confirmed by double optin. \\
+Registrations: Number of registered logins. In the case of double opt-in procedures, regardless of whether the registration was confirmed by double opt-in. \\
-Confirmations - Number of registered registrations whose e-mail address was not included in the master data before registration.
+Confirmations: Number of registered registrations whose e-mail address was not included in the master data before registration.
 Below you will find the openings and clicks on the DOI Mail.
@@ Line 69: / Line 63: @@
-==== menue item DOI campaign ====
+==== Menu item DOI campaign ====
 This tab only appears if //Email// was selected as the channel and //Double Opt-In// was selected as the opt-in type.
@@ Line 75: / Line 69: @@
 You can create one or more messages. The message that is to be used for the DOI Mail must be activated.
-The available messages are displayed in a list. (Maximum) one message is active. The active one is used for delivery. It cannot be edited. To change the active message, you can copy it and edit the copy, or create a new one. Activating the message created in this way will deactivate the previously active message.
+The available messages are displayed in a list. (Maximum) one message is active. The active one is used for delivery. It cannot be edited. To change the active message, you can copy it and edit the copy or create a new one. Activating the message created in this way will deactivate the previously active message.
 === Creating a double opt-in email  ===
@@ Line 81: / Line 75: @@
 Don't forget to configure sender and subject too!
-You can use $confirmToken which contains the opt-in confirmation token. This token can be used to confirm an opt-in via REST API
+You can use $confirmToken, which contains the opt-in confirmation token. This token can be used to confirm an opt-in via REST API. This placeholder is not replaced in the preview of this mail and is only available when the double opt-in mail is actually sent.
-This placeholder is not replaced in the preview of this mail and only available when the double opt-in mail is actually sent
 Example URL:
-https://foo.bar.com/?token=$confirmToken
+<nowiki>https://foo.bar.com/?token=$confirmToken</nowiki>
+If you want to use our system and still want to use a replaced URL for tracking you can use this URL:
+<nowiki>https://system.promio-connect.com/optin/?token=$confirmToken</nowiki>
+==== Menu item Form ====
+<WRAP round tip 80%>
+The form creation is only possible in clients with the mail-unique identification feature (not for custID-unique). It is only available for the “E-Mail” channel.
+</WRAP>
+Under this menu item, you can configure a form for address generation that you can embed on a website or call up as a stand-alone page.
+=== Content tab ===
+In the //Content// tab, you can select the fields that your form should contain.
+{{:en:addresses_interfaces_formular_content.png?nolink&400|}}
+<WRAP round info 80%>
+The E-Mail and "Send" button fields cannot be removed, but you can change the label.
+A recipient field cannot be added to a form more than once.
+</WRAP>
+== Field of type "Newsletter" ==
+The same newsletter can be selected as often as you like.
+Validation is not possible in the preview.
+=== Confirmation page tab ===
+Here you can enter and format text that should be displayed after the completed form has been submitted.
+{{:en:addresses_interfaces_formular_confirm.png?nolink&400|}}
+<WRAP round info 80%>
+Our system does not support placeholders on the confirmation page, e.g., for a personalized greeting.
+</WRAP>
+=== Design tab ===
+Set the font, font size, font color, and primary color of the button. You can optionally insert a custom CSS.
+{{:en:addresses_interfaces_formular_design.png?nolink&400|}}
+=== General tab ===
+Select a language. To use a separate page for the form, enter an image path and an imprint link.
+{{:en:addresses_interfaces_formular_general.png?nolink&400|}}
+<WRAP round info 80%>
+Click Publish to initially publish the form so that it is available. Publish changes to make them visible on the page.
+</WRAP>
+=== Preview tab ===
+Here you can see the preview of the created form.
+{{:en:addresses_interfaces_formular_preview.png?nolink&400|}}
+=== Usage tab ===
+Copy the code of the created form to embed it on a web page or copy the code for a stand-alone page.
-If you want to use our system and still want to use a replaced URL for tracking you can use this URL:
+{{:en:addresses_interfaces_formular_usage.png?nolink&400|}}
-https://system.promio-connect.com/optin/?token=$confirmToken
-{{tag>addresses interfaces hooks auto_target_groups address_generations subscribes registrations registration_forms registration_pages DOI SOAP API }}
+{{tag>addresses form interfaces hooks auto_target_groups address_generations subscribers registrations registration_pages DOI REST API }}

User Tools

Site Tools

Differences

Page Tools