Differences

This shows you the differences between two versions of the page.

--- en:how_does_a_split_test_work [2014/03/10 17:33] – 192.168.0.129
+++ en:how_does_a_split_test_work [2025/06/26 11:50] (current) – bk
@@ Line 1: / Line 1: @@
-====== How does a split test work? ======
+====== How does split testing work? ======
-(not available in promio.mail.one)
+<WRAP round info 100%>
+**What is an A-B test/split test?**
-In order to send a split test campaign, select "A/B test campaign" as campaign type when setting up a new campaign. In an A/B test, different designs or subject lines can be tested against each other in a pre-delivery. The main delivery to the winner begins automatically after a predefined period.
+It is often difficult to predict how readers will react to a campaign. This is why the most important principle in email marketing is test, test, test. The automatic A/B split tests in promio.connect make it easy to test a campaign.
+Set up two or more emails (with differences in,e.g., subject line, sender, or content). Each of these emails is sent to a subset of the target group. The winning email (with the highest open, click, or conversion rate) is automatically sent to the rest of the target group with a configurable time offset.
-The settings necessary for an A/B test are made in this box.
+</WRAP>
-{{:en:ab_test_parameter_en.png?nolink|}}
+A split-run test allows you to compare different designs or subject lines in a test mailing prior to the main delivery. In the main delivery, the best-performing mailing is then automatically sent to the rest of the recipients. When creating the campaign, select the type //A/B Test Campaign//.
-  * Test duration: defines the interval between the A/B test and the full delivery in hours.
+This box, which only becomes visible after setting up the creatives, contains all necessary settings for split testing.
-  * Winner parameters: the email for the main delivery can be determined based on the conversion, the clicks or the opens.
-  * Target group: in contrast to default campaigns, the target group is selected at campaign level. It contains the addresses of the pre-delivery and the main delivery.
-  * Test proportion: proportion of the target group to be used for the pre-delivery, as a percentage.
-Please note that coupon codes cannot be used in an A-B test campaign.
+{{:en:campaings_drafts_ab_campaigns.png?nolink&600|}}
+  * **Duration test period**: Defines the period of time between test run and main delivery in hours. In this time, the winner gets identified.
+  * **Winner Parameter**: The message with the highest value in this category is declared A/B test winner. It can be determined on the basis of conversions, clicks, or opens.
+  * **Target group**: Unlike standard campaigns, split testing requires the target group to be selected at the campaign level. The target group contains the addresses for both the test run and the main delivery.
+  * **Test Part of target group**: The percentage of the target group that will be used for the test run.
+The delivery date that has been inserted under //Actions > Send campaign > Delivery date// refers to the start of the test part. The main delivery starts after finishing the test period.
+**Example**:
+  * Duration test period: 5 h
+  * Campaign start: 10 o’clock
+The test run starts at 10 o’clock; the main delivery follows at 15 o’clock. \\
+<WRAP round alert 70%>
+Please keep in mind that
+  * Coupon codes cannot be used in an A/B test campaign.
+  * There is no option in A/B test campaigns to refresh the target group. This means that you should finalize your split tests as late as possible so you do not address those who signed out.
+</WRAP>
+{{tag>A/B_tests split_tests main_delivery}}

User Tools

Site Tools

Differences

Page Tools